The Perfect Balance!
Case IH is the Leader of the Track with 20 YEARS of track technology!
In 1996 Case IH introduced our unique and Exclusive Quadtrac® System!
My experience operating tractors with rubber tires and two-track systems on the farm is that when it comes to ground contact and balance, the other systems could never match the Quad!
The Quadtrac is The Perfect Balance of PRODUCTIVITY and EFFICIENCY with less slippage & better FLOTATION!
We at Titan Machinery have recently shipped a used Case IH Steiger 450 Tractor equipped with this Exclusive Quadtrac® System to Africa and our customers are SATISFIED!
Below are some tips for the tracks and tractor to operate at its best,
but ALWAYS consult your Operator’s Manual for proper instructions.
ROAD TRANSPORT tread bar wear rates can be reduced by staying off pavement and by reducing transport speeds.
The silica present in the dirt lubricates and polishes the components.
During long distance ROAD-TRIPS it is always a good idea to take breaks
and throw a shovel full of dirt in the undercarriage.
Check Track Alignment at a minimum every 200 hours.
Engine oil should be 50-70 psi.
Engine coolant will go as high as 215 degrees Fahrenheit (101.7C) .
Engine air temp sets an alarm at 180 degrees Fahrenheit (82.3C).
Transmission temp will run up to the 160 to 170 degree Fahrenheit range(71.1C to 76.7C), depending on how hard it is working.
It is always a good idea to grease the tractor every 10 hours, check engine oil levels, hydraulic oil level, transmission level and coolant.
If you are interested in learning more about the Case IH Steiger tractor equipped with the Quadtrac® System please note that Titan Machinery is the largest Case IH dealer in the World with 92 dealerships in North America and 16 dealers in Europe and our US headquarters is located in West Fargo, ND which is less than 10 minutes away from the Case IH plant in Fargo, ND. Please feel free to e-mail us at email@example.com if you would like a FREE Case IH Steiger Quadtrac key chain and are interested in a tour of the manufacturing facility which produces the Case IH Steiger series 4wd tractors, wheel loaders and bidirectional equipment – we would be more than happy to welcome you to our Shared Resource Center and provide a tour!